|
użytkowników online: 64
|
OPINIE UŻYTKOWNIKÓW
|
Porady zamieszczone tutaj przez Darka są pomocne w wielu chwilach. Wielokrotnie tworząc jakiś złożony serwis korzystam z tych porad. Można by tworzyć samemu te skrypty, ale tak naprawdę czy nie lepiej jest wziąć skrypt z tej strony i zmodyfikowac go dla swoich potrzeb? Wprawdzie możemy taki skrypt napisać sami, ale po co, skoro stracimy czas na coś, co ktoś juz napisał, przetestował i może zagwarantować, że działa poprawnie. Któryś raz z rzędu opłacam abonament i nie raz jeszcze opłacę. Kawał dobrej roboty i ogrom wiedzy w jednym miejscu.
Piotr Karamański
Design Studio
|
|
PODRĘCZNIK PHP 5.x, 4.x, 3.x - częściowo spolszczony / źródło: www.php.net
[Spis]
[A]
[B]
[C]
[D]
[E]
[F]
[G]
[H]
[I]
[J]
[K]
[L]
[M]
[N]
[O]
[P]
[Q]
[R]
[S]
[T]
[U]
[V]
[X]
[W]
[Z]
CXL. Zip File Functions (Read Only Access)
This module enables you to transparently read ZIP compressed
archives and the files inside them.
This module uses the functions of the ZZIPlib library by Guido Draheim.
You need ZZIPlib version >= 0.10.6.
Note that ZZIPlib only provides a subset of functions
provided in a full implementation of the ZIP compression algorithm
and can only read ZIP file archives. A normal ZIP utility is
needed to create the ZIP file archives read by this library.
To rozszerzenie PECL nie
jest dołączane do PHP.
Dodatkowe informacje, takie jak nowe wersje, pliki do
pobrania, pliki źródłowe, informacje o opiekunach czy rejestr zmian, można
znaleźć tutaj:
http://pecl.php.net/package/zip.
W PHP 4 to rozszerzenie PECL można
znaleźć w podkatalogu ext/ źródeł PHP lub pod znajdującym
się wyżej odnośnikiem PECL.
In order to use these functions you must compile PHP with zip support
by using the --with-zip[=DIR]
configure option.
Windows users will enable php_zip.dll inside
of php.ini in order to use these functions.
W PHP 4 ten DLL znajduje się w
podkatalogu extensions/ binarnej dystrybucji PHP dla
Windows.
DLL z tym rozszerzeniem
PECL można pobrać ze strony
PHP Downloads lub
http://snaps.php.net/.
Notatka:
Zip support before PHP 4.1.0 is experimental. This section
reflects the Zip extension as it exists in PHP 4.1.0 and later.
To rozszerzenie nie definiuje posiada żadnych
dyrektyw konfiguracyjnych w pliku php.ini. To rozszerzenie nie posiada żadnych rodzajów zasobów. To rozszerzenie nie posiada żadnych stałych.
This example opens a ZIP file archive, reads each file in the
archive and prints out its contents. The
test2.zip archive used in this example is
one of the test archives in the ZZIPlib source distribution.
Przykład 1. Zip Usage Example |
<?php
$zip = zip_open("/tmp/test2.zip");
if ($zip) {
while ($zip_entry = zip_read($zip)) {
echo "Name: " . zip_entry_name($zip_entry) . "\n";
echo "Actual Filesize: " . zip_entry_filesize($zip_entry) . "\n";
echo "Compressed Size: " . zip_entry_compressedsize($zip_entry) . "\n";
echo "Compression Method: " . zip_entry_compressionmethod($zip_entry) . "\n";
if (zip_entry_open($zip, $zip_entry, "r")) {
echo "File Contents:\n";
$buf = zip_entry_read($zip_entry, zip_entry_filesize($zip_entry));
echo "$buf\n";
zip_entry_close($zip_entry);
}
echo "\n";
}
zip_close($zip);
}
?>
|
|
User Contributed Notesangelnsn1 at hotmail dot com
27-Jan-2006 03:06
this function extract all files and subdirectories, you can choose verbose mode for get paths of files extracted. the function return a msg what indicate the error, if msg is OK, all is done.
---
code:
function unzip($dir, $file, $verbose = 0) {
$dir_path = "$dir$file";
$zip_path = "$dir$file.zip";
$ERROR_MSGS[0] = "OK";
$ERROR_MSGS[1] = "Zip path $zip_path doesn't exists.";
$ERROR_MSGS[2] = "Directory $dir_path for unzip the pack already exists, impossible continue.";
$ERROR_MSGS[3] = "Error while opening the $zip_path file.";
$ERROR = 0;
if (file_exists($zip_path)) {
if (!file_exists($dir_path)) {
mkdir($dir_path);
if (($link = zip_open($zip_path))) {
while (($zip_entry = zip_read($link)) && (!$ERROR)) {
if (zip_entry_open($link, $zip_entry, "r")) {
$data = zip_entry_read($zip_entry, zip_entry_filesize($zip_entry));
$dir_name = dirname(zip_entry_name($zip_entry));
$name = zip_entry_name($zip_entry);
if ($name[strlen($name)-1] == '/') {
$base = "$dir_path/";
foreach ( explode("/", $name) as $k) {
$base .= "$k/";
if (!file_exists($base))
mkdir($base);
}
}
else {
$name = "$dir_path/$name";
if ($verbose)
echo "extracting: $name<br>";
$stream = fopen($name, "w");
fwrite($stream, $data);
}
zip_entry_close($zip_entry);
}
else
$ERROR = 4;
}
zip_close($link);
}
else
$ERROR = "3";
}
else
$ERROR = 2;
}
else
$ERROR = 1;
return $ERROR_MSGS[$ERROR];
}
---
example:
$error = unzip("d:/www/dir/", "zipname", 1);
echo $error;
---
i hope this help you,
good bye.
ringu at mail dot ru
20-Aug-2005 03:12
i try to find function that will show exists file in zip archive or not. of course i not found it. and so write mine:
first will just check archive for list of files, if not found all files function return FALSE:
function zipx_entries_exists()
{
$names=array();
$args=func_get_args();
$far_size=count($args);
if($args[0])
{
for(; $zip_entry=zip_read($args[0]); $names[]= zip_entry_name($zip_entry));
for($x=1; $x<=$far_size; $t+=in_array($args[$x], $names), $x++);
return $t==--$far_size;
}else{
return 'No zip file in descriptor!';
}
}
example:
$zip=zip_open('any_zip_file_zip');
var_dump(zip_entries_exists($zip, 'photo_1.jpg', 'photo_2.jpg'));
second function will try to find files in zip, if not found it return string with names of not found files with specified delimeter:
function zipx_entries_nonexists_list()
{
$names=array();
$args=func_get_args();
$m=NULL;
$far_size=count($args);
if($args[0])
{
for(; $zip_entry=zip_read($args[0]); $names[]= zip_entry_name($zip_entry));
for($x=2; $x<=$far_size; $m.=(in_array($args[$x], $names) ? NULL : $args[$x].$args[1]), $x++);
return trim($m, $args[1]);
}else{
return 'No zip file in descriptor!';
}
}
example:
$zip=zip_open('any_zip_file_zip');
var_dump(zip_entries_nonexists_list($zip, '<br />', 'photo_1.jpg', 'photo_2.jpg'));
it will return if not found files:
photo_1.jpg<br />photo_2.jpg
tom
28-Jun-2005 06:33
If you just want to unzip a zip folder an alternative to some of the lengthy functions below is:
<?
function unzip($zip_file, $src_dir, $extract_dir)
{
copy($src_dir . "/" . $zip_file, $extract_dir . "/" . $zip_file);
chdir($extract_dir);
shell_exec("unzip $zip_file");
}
?>
You don't need the ZIP extension for this.
candido1212 at yahoo dot com dot br
27-Apr-2005 05:52
New Unzip function, recursive extract
Require mkdirr() (recursive create dir)
$file = "2537c61ef7f47fc3ae919da08bcc1911.zip";
$dir = getcwd();
function Unzip($dir, $file, $destiny="")
{
$dir .= DIRECTORY_SEPARATOR;
$path_file = $dir . $file;
$zip = zip_open($path_file);
$_tmp = array();
$count=0;
if ($zip)
{
while ($zip_entry = zip_read($zip))
{
$_tmp[$count]["filename"] = zip_entry_name($zip_entry);
$_tmp[$count]["stored_filename"] = zip_entry_name($zip_entry);
$_tmp[$count]["size"] = zip_entry_filesize($zip_entry);
$_tmp[$count]["compressed_size"] = zip_entry_compressedsize($zip_entry);
$_tmp[$count]["mtime"] = "";
$_tmp[$count]["comment"] = "";
$_tmp[$count]["folder"] = dirname(zip_entry_name($zip_entry));
$_tmp[$count]["index"] = $count;
$_tmp[$count]["status"] = "ok";
$_tmp[$count]["method"] = zip_entry_compressionmethod($zip_entry);
if (zip_entry_open($zip, $zip_entry, "r"))
{
$buf = zip_entry_read($zip_entry, zip_entry_filesize($zip_entry));
if($destiny)
{
$path_file = str_replace("/",DIRECTORY_SEPARATOR, $destiny . zip_entry_name($zip_entry));
}
else
{
$path_file = str_replace("/",DIRECTORY_SEPARATOR, $dir . zip_entry_name($zip_entry));
}
$new_dir = dirname($path_file);
// Create Recursive Directory
mkdirr($new_dir);
$fp = fopen($dir . zip_entry_name($zip_entry), "w");
fwrite($fp, $buf);
fclose($fp);
zip_entry_close($zip_entry);
}
echo "\n</pre>";
$count++;
}
zip_close($zip);
}
}
Unzip($dir,$file);
Nahaylo Vitalik
25-Feb-2005 03:52
Zip Class from Devin Doucette at phpclasses.org
Allows the creation of tar, gzip, bzip2, and zip archives, and the extraction of tar, gzip, and bzip2.
Supports relative paths/no paths, comments, and recursing through subdirectories.
Can write file to disk, allow user to download directly, or return file contents in a string or an array.
Does not require any external programs to run.
Here is a link: http://www.phpclasses.org/browse/package/945.html
23-Feb-2005 05:54
If (as me) all you wanted to do is store a big string (for example, a serialized array or the like) in a mysql BLOB field, remember that mysql has a COMPRESS() and UNCOMPRESS() pair of functions that do exactly that. Compression/decompression is therefore available also when accessing the DB from other languages like java, etc.
Mishania AT ketsujin DOT COM
06-Jan-2005 05:19
I slightly changed the extension of Schore that makes function operate more effiecently - less number of itterations. This is most important in dealing with HUGE archives. I also add comment to brief the code. Fits for WIN users.
function unzip($dir,$file) {
$zip = zip_open($dir.$file.".zip"))
if ($zip) {
mkdir($dir.$file);
while ($zip_entry = zip_read($zip)) {
if (zip_entry_open($zip,$zip_entry,"r")) {
$buf = zip_entry_read($zip_entry, zip_entry_filesize($zip_entry));
$hostDir = dirname(zip_entry_name($zip_entry));
/* for root "." directory nothing to be done coase root directory was
created before the while-loop statement */
if ($hostDir != ".") {
$absPathToHostDir = $dir.$file."\\";
/* Convrerts path string upon to FMS & OS-WIN configuration */
foreach ( explode("/",$hostDir) as $k)
$absPathToHostDir = $absPathToHostDir . $k . "\\";
$absPathToHostDir = substr($absPathToHostDir,0,-1);
if (is_file($absPathToHostDir))
unlink($absPathToHostDir);
if (!is_dir($absPathToHostDir))
mkdir($absPathToHostDir);
/* Stores Archive entries BOTH as file: Directories & Files;
for this porpose we need these 2 hereabove [IF] checks */
$fp=fopen($dir.$file."\\".zip_entry_name($zip_entry),"w");
fwrite($fp,$buf);
fclose($fp);
zip_entry_close($zip_entry);
}
}
else {
echo "unable open - ";
return false;
}
} // while-loop end
zip_close($zip);
}
else
return false;
return true;
}
schore at NOSPAM dot hotmail dot com
13-Dec-2004 07:55
I have had problems with the function of kristiankjaer to unpack zipfiles within any directories.
So I wrote a little extension.
<?php
function unpackZip($dir,$file) {
if ($zip = zip_open($dir.$file.".zip")) {
if ($zip) {
mkdir($dir.$file);
while ($zip_entry = zip_read($zip)) {
if (zip_entry_open($zip,$zip_entry,"r")) {
$buf = zip_entry_read($zip_entry, zip_entry_filesize($zip_entry));
$dir_name = dirname(zip_entry_name($zip_entry));
if ($dir_name != ".") {
$dir_op = $dir.$file."/";
foreach ( explode("/",$dir_name) as $k) {
$dir_op = $dir_op . $k;
if (is_file($dir_op)) unlink($dir_op);
if (!is_dir($dir_op)) mkdir($dir_op);
$dir_op = $dir_op . "/" ;
}
}
$fp=fopen($dir.$file."/".zip_entry_name($zip_entry),"w");
fwrite($fp,$buf);
zip_entry_close($zip_entry);
} else
return false;
}
zip_close($zip);
}
} else
return false;
return true;
}
?>
kristiankjaer AT gmail DOT com
06-Dec-2004 01:06
Here is a function if all you need is to unpack an archive:
function unpackZip($dir,$file) {
$root=$_SERVER['DOCUMENT_ROOT'];
if ($zip = zip_open($root.$dir.$file.".zip")) {
if ($zip) {
mkdir(".".$dir.$file);
while ($zip_entry = zip_read($zip)) {
if (zip_entry_open($zip,$zip_entry,"r")) {
$buf = zip_entry_read($zip_entry, zip_entry_filesize($zip_entry));
$fp=fopen(".".$dir.$file."/".zip_entry_name($zip_entry),"w");
fwrite($fp,$buf);
zip_entry_close($zip_entry);
} else
return false;
}
zip_close($zip);
}
} else
return false;
return true;
}
01-Jul-2004 02:40
PKZipfiles (or Winzip files) can be easily created by using my Ziplib class, can be found on http://sourceforge.net/projects/phpziplib . All it requires is PHP to be compiled with zlib, and support for classes(don't know when they've been added, but I think with PHP4 you're safe).
php at isaacschlueter dot com
24-Jun-2004 01:15
If you don't have the --with-zip=DIR compile option and can't change it, but you do have --with-pear, then you can use the pear Archive_Zip class available at http://cvs.php.net/pear/Archive_Zip/
As of 2004-06-23, the class isn't packaged and auto-documented yet, but like all pear classes, the comments are extremely verbose and helpful, and you can download the php file as a standalone. Just include the Zip.php in your project, and you can use the class.
krishnendu at spymac dot com
31-May-2004 10:28
If you want to unzip an password protected file with php..try the following command....it works in Unix/Apache environment...I haven't tested in any other environment...
system("`which unzip` -P Password $zipfile -d $des",$ret_val)
Where $zipfile is the path to the .zip to be unzipped and $des is path to the destination directory.....here both absolute and relative path to the script (which contains this system command) will work...
if everything runs well...file should be unzipped at the $des directory..and you will get 0 value for $ret_val , which means success(info-zip.org)
Regards
Krishnendu
postmaster at alishomepage dot com
24-Jan-2004 12:28
Hannes Gassert
02-Dec-2003 06:53
master_auer at web dot de
17-Nov-2003 01:49
vbwebprofi at gmx dot de
13-Nov-2003 06:05
Joris P.
04-Sep-2003 06:36
"If you just want to unzip everything of a zip file in a directory"
Watch out with that function, your fopen function uses 'r' instead of 'rb' and the fwrite does not include a filesize. So if you have binary files into that zip file (what you probably do), it will go wrong...
phpContrib (A T) esurfers d o t c o m
18-Jul-2003 11:41
Sometimes you may not be able to install the necessary resources to run the ZIP lib. Maybe because you have no control of the server, or maybe because you cannot find the correct libraries for your php...
Anyway do not despair, there is another solution!
I was in this situation (my client could not install it on the server) so I developed a small libraryin pure PHP that is compatible with PHP's own lib but uses the commandline 'unzip' command directly form PHP. You can configure it to use any commandline unzipping tool (so it should work even with other compressed files, as long as there is a commandline tool). It should work on most platforms with an unzip command (Win32 included) although I have tested only under unix.
What it does exactly, is replacing all the functions of the Zip library with equivalent ones. So the example in this page will work (just rename every zip_... function m_zip_...):
<?php
$zip =m_zip_open("/tmp/test2.zip");
if ($zip) {
while ($zip_entry = m_zip_read($zip)) {
echo "Name: " . m_zip_entry_name($zip_entry) . "\n";
echo "Actual Filesize: " . m_zip_entry_filesize($zip_entry) . "\n";
echo "Compressed Size: " . m_zip_entry_compressedsize($zip_entry) . "\n";
echo "Compression Method: " . m_zip_entry_compressionmethod($zip_entry) . "\n";
if (m_zip_entry_open($zip, $zip_entry, "r")) {
echo "File Contents:\n";
$buf = m_zip_entry_read($zip_entry, zip_entry_filesize($zip_entry));
echo "$buf\n";
m_zip_entry_close($zip_entry);
}
echo "\n";
}
m_zip_close($zip);
}
?>
The library will create a new folder and call unzip on the file when you call m_zip_open().
It will get rid of all the unzipped things when you call m_zip_close().
It will walk the directory structure of the ZIP file as you call m_zip_read($zip) getting into directories and then out again.
Then you will be able to read chunks of (or th whole) files with m_zip_entry_read()
: : : INCOMPATIBILITIES : : :
Once the zipfile is unzipped, I will have no way to know the size of the entries or the compression methods, so the functions m_zip_entry_compressedsize() and m_zip_entry_compressionmethod() just return a '?'.
Of course what zipfiles will be compatible and what not will dependo on the command line tool you choose to use.
: : : CONFIGURATION : : :
There are two things to setup:
A path to a directory where we can create subfolders and unzip things:
define('UNZIP_DIR','/data/fandango/html/update/unzipped/');
The command to invoke to unzip the files:
define('UNZIP_CMD','unzip -o @_SRC_@ -x -d @_DST_@');
DO NOT REMOVE THE @_SRC_@ and @ _DST_@ markers. This is where the library will put the source file name you pass and the destination subfolder (it will create a subfolder of UNZIP_DIR and pass that)
: : : DOWNLOAD : : :
You will find the library and a demo file (with the example on this page) at http://esurfers.com/m-zip/
travis
17-Jun-2003 07:06
just a not of caution--using the dynamic zip class mentioned earlier seems to cause issues with high ascii characters (their values are not preserved correctly, and the file will not unzip)
NOSP at M dot patrick_allaert(AROBAS)pandora dot be
08-Apr-2003 07:08
If you just want to unzip everything of a zip file in a directory (and create unexisting directories), let's try this:
function unzip($file, $path) {
$zip = zip_open($file);
if ($zip) {
while ($zip_entry = zip_read($zip)) {
if (zip_entry_filesize($zip_entry) > 0) {
// str_replace must be used under windows to convert "/" into "\"
$complete_path = $path.str_replace('/','\\',dirname(zip_entry_name($zip_entry)));
$complete_name = $path.str_replace ('/','\\',zip_entry_name($zip_entry));
if(!file_exists($complete_path)) {
$tmp = '';
foreach(explode('\\',$complete_path) AS $k) {
$tmp .= $k.'\\';
if(!file_exists($tmp)) {
mkdir($tmp, 0777);
}
}
}
if (zip_entry_open($zip, $zip_entry, "r")) {
$fd = fopen($complete_name, 'w');
fwrite($fd, zip_entry_read($zip_entry, zip_entry_filesize($zip_entry)));
fclose($fd);
zip_entry_close($zip_entry);
}
}
}
zip_close($zip);
}
}
To use this function:
unzip('c:\\file.zip','c:\\temp\\'); // BE CAREFULL: second argument *MUST* finish by a "\" ! ("/" under *nix)
Patrick
chris
23-Mar-2003 07:32
Watch out with archives that contain subfolders if you're using the zip functions to extract archives to actual files. Let's say you're trying to extract foldername/filename.txt from the archive. You can't fopen a directory that doesn't exist, so you'll have to check for the existance of directory foldername and create it if it isn't found, then fopen foldername/filename.txt and begin writing to that.
ottawasixtyseven at hotmail dot com
29-Oct-2002 09:04
WOW ... after weeks and weeks of research I thought I'd make somebody elses life a little easier. If you're wondering how to make PHP 4.2.3 read windows zip files (winzip, pkzip, etc) do this:
NOTE: THIS IS FOR WINDOWS SERVERS NOT LINUX OR OTHER. You need zziplib for Linux. http://zziplib.sourceforge.net/
ON PHP WINDOWS SERVER
1) Grab the php_zip.dll from the extensions dir in php-4.3.0pre2-Win32.zip
2) Add a line extension=php_zip.dll to your php.ini
3) Restart your web server
php_zip.dll obviously works on PHP 4.3.0pre2 but you can't run Zend Optimizer on PHP 4.3 (yet). You can run Zend Optimizer on PHP 4.2.3 but it doesn't ship with php_zip.dll. The php_zip.dll that ships with PHP 4.3.0pre2 may even work with older version but I haven't tested that.
For documentation on how to use the zip functions (not the gzip functions that are documented on the php site) go here:
http://zziplib.sourceforge.net/zziplib.html
Newbie Von Greenhorn
a1cypher at shaw dot ca
11-Oct-2002 02:28
For creating zip files, I highly suggest that you have a look at the class used in phpMyAdmin. It makes it very easy to do and it appears to be opensource.
bermi[arroba]akelos.com
04-Oct-2002 03:27
guidod at gmx dot de
16-Apr-2002 08:22
- look at - http://zipios.sf.net -
it is a C++ class that can also write zip files.
it is modelled after the resp. java interface.
Please also note that I (Guido Draheim) can not
answer questions on compiling zziplib-support
into php, I did not add it, and I do not know
anything about the php module interface. If you
find bugs or have suggestions for more features
then I would be pleased to hear about it. TIA, guido
fbiggun at hotmail dot com
03-Jan-2002 10:29
vangoethem at hotmail dot com
28-Dec-2001 08:51
If you are looking for a way to create ZIP files dynamically in PHP, you should look at the wonderful zipfile class.
It seems there is no official page for this class. You may get it by retrieving the zip.lib.php from the PhpMyAdmin 2.5.2:
http://www.phpmyadmin.net/
|
